Automated Product Serial Commands
To find serial commands for Chief's Automated CM2, PXR & SL220 select a product and address below. All similar devices on the same network will respond to broadcast commands regardless of individual device address.
Command Name |
Command Description |
Code with Check Sum |
CANCEL_MOVE_CMD |
Cancel Move (Stop) |
>>0500037D |
CLEAR_FAULT_HISTORY |
Clear Fault History |
>>05007384 |
GET_LATEST_FAULT |
Get Last Fault Code |
>>05007182 |
GET_MODEL_DESCRIPTOR_CMD |
Get Product Description |
>>05006686 |
GET_NEXT_FAULT |
Get Next Fault Code |
>>05007283 |
GET_OP_COUNT_CMD |
Get Operations count |
>>05006484 |
GET_PRODUCT_CODE |
Get Product Code Number |
>>05006B92 |
GET_SERIAL_NUMBER_CMD |
Get Serial Number |
>>05006888 |
GET_SWITCH_SETTINGS_CMD |
Get Switch Settings |
>>05006585 |
GET_SW_REVISION_CMD |
Get Software Revision |
>>05006787 |
GET_SYSTEM_STATUS_CMD |
Get Status of Product |
>>05002F92 |
STATUS_CMD |
Get Status |
>>0500017B |
Extend to EOT |
Extend to End of Travel |
>>0500107B |
Retract to EOT |
Retract to End of Travel |
>>0500127D |
Command Name CANCEL_MOVE_CMD
Command Description Cancel Move (Stop)
Code with Check Sum >0500037D
|
Command Name CLEAR_FAULT_HISTORY
Command Description Clear Fault History
Code with Check Sum >05007384
|
Command Name GET_LATEST_FAULT
Command Description Get Last Fault Code
Code with Check Sum >05007182
|
Command Name GET_MODEL_DESCRIPTOR_CMD
Command Description Get Product Description
Code with Check Sum >05006686
|
Command Name GET_NEXT_FAULT
Command Description Get Next Fault Code
Code with Check Sum >05007283
|
Command Name GET_OP_COUNT_CMD
Command Description Get Operations count
Code with Check Sum >05006484
|
Command Name GET_PRODUCT_CODE
Command Description Get Product Code Number
Code with Check Sum >05006B92
|
Command Name GET_SERIAL_NUMBER_CMD
Command Description Get Serial Number
Code with Check Sum >05006888
|
Command Name GET_SWITCH_SETTINGS_CMD
Command Description Get Switch Settings
Code with Check Sum >05006585
|
Command Name GET_SW_REVISION_CMD
Command Description Get Software Revision
Code with Check Sum >05006787
|
Command Name GET_SYSTEM_STATUS_CMD
Command Description Get Status of Product
Code with Check Sum >05002F92
|
Command Name STATUS_CMD
Command Description Get Status
Code with Check Sum >0500017B
|
Command Name Extend to EOT
Command Description Extend to End of Travel
Code with Check Sum >0500107B
|
Command Name Retract to EOT
Command Description Retract to End of Travel
Code with Check Sum >0500127D
|