Extension Column Accessories

This end cap covers the end of an extension column for a clean look.

• Threaded end cap connects to any 1.5" NPT extension column,
• Provides a finished appearance
• TAA Compliant

Quick-snap cable covers save installation time and hide cables for a clean aesthetic.

• Unique cover design snaps on easily
• Quickly adapts to 1.5" and 2" NPT
• Routes cables alongside of instead of through extension columns
• Includes one 4' cable cover that can easily be cut to size

Quick-snap cable covers save installation time and hide cables for a clean aesthetic.

• Unique cover design snaps on easily
• Quickly adapts to 1.5" and 2" NPT
• Routes cables alongside of instead of through extension columns
• Includes one 4' cable cover that can easily be cut to size
• TAA Compliant

This end cap slides over the end of an NPT pipe for a finished look.

• Covers the end of extension columns for a clean appearance
• Pre-cut for routing cables through cover
• Ten caps per kit

Provides stabilization for projector ceiling installations

• Cable system attaches to 1.5"NPT extension column for increased rigidity
• Includes one pole clamp, four 10' cables and four turnbuckles
• TAA Compliant

This decorative finishing ring visually enhances suspended ceiling installations by covering the hole where the extension column passes through the ceiling tile.

• The ring is hinged to open for easy installation
• Compatible with fixed CMS extension columns and fixed CPA columns

This decorative finishing ring visually enhances suspended ceiling installations by covering the hole where the extension column passes through the ceiling tile.

• The ring is hinged to open for easy installation
• Compatible with fixed CMS extension columns and fixed CPA columns

This decorative finishing ring visually enhances suspended ceiling installations by covering the hole where the extension column passes through the ceiling tile.

• The ring is hinged to open for easy installation
• Compatible with fixed CMS extension columns and fixed CPA columns

The CMA643 is a decorative finishing trim ring for the outside of our CMS adjustable extension column pipe.

• Finishing ring visually enhances suspended ceiling installations by covering the hole where the column passes through the ceiling tile
• Hinged for new of retrofit installations
• ID of finish ring is 2.44" (62 mm)

This accessory attaches to Chief extension columns that have been cut to length.

• Bolt-on coupler to add 1.5" NPT threads to a Chief extension column that has been cut to a shorter length
• 2" (51mm) height added to installation
• Set screws and bolts included for security and stability

This accessory attaches to Chief extension columns that have been cut to length.

• Bolt-on coupler to add 1.5" NPT threads to a Chief extension column that has been cut to a shorter length
• 2" (51mm) height added to installation
• Set screws and bolts included for security and stability

• Enables rapid image alignment
   
• Features 2-stage precision height adjustment (3"
• Macro adjustment button
• Micro adjustment dia
   
• For use with CMS columns

• Compatible with all 1.5" pipe thread

The CMSH3S allows for rapid image alignment for projectors & flat panels. Press the button for a macro adjustment and then use the micro adjust dial to fine tune the image.

• Enables rapid image alignment

• Features 2-stage precision height adjustment (3"
• Macro adjustment button
• Micro adjustment dia

• For use with CMS columns
   
• Compatible with all 1.5" pipe thread
  

Use the CPA264 to connect CPA columns to 1.5" threaded Columns.

Use the CPA263 to join 2 CPA columns.

The CPA640 provides a clean finish when mounting CPAE columns through a ceiling tile.

Compatible with all CMS & CPAE columns, KITEC projector kits and CMA274 quick-snap cable covers

The CPA640W provides a clean finish when mounting CPAE columns through a ceiling tile.

Compatible with all CMS & CPAE columns, KITEC projector kits and CMA274 quick-snap cable covers

The CPA265 enables the use of Chief RPA, RPM, RSA, & RSM projector mounts with cut-to-length CPA columns.  A quick and easy solution for onsite customization. 

• Safe working load of 50 lbs (22.68 kg)
• Tension adjustable for a solid connection
• Assembly hardware included
• CMA274 is recommended for external cable management
  
  

The CPA261 coupler is used to transition LCM Video Wall products to a 1.5" NPT threaded column.