Whiteboard Mounting Solutions

The WBAP is designed to be used in combination with all WBM2 over whiteboard mount solutions.  Compatible with SMART™ 100, 300, UF65, UF75, UF70, UX60, X80 and U100 short throw projectors. This helps achieve a single plane for mounting the SMART™ all in one i2, i3, i4, i5, i6, ix, ix2 and ix3 solutions over an existing dry erase board.

• Can be mounted directly to wood stud walls, steel stud walls, concrete or brick walls
• Enables mounting Smart All in One solutions
• Compatible with SMART™ UF45, UF55, UF65, UF75, UF70, UX60, UX80 and U100 short throw projectors wall arms
• Compatible with SMART™ all in one i2, i3, i4, i5, i6 ix, ix2 and ix3 solutions 
• TAA Compliant

The WBM2 installs directly to the wall over pre-existing dry erase boards or chalkboards without causing damage. The WBM2 was designed for a quick install providing speed and flexibility with multiple post install adjustments. Compatible with 800, 600, & M600 Series boards.

See WBAP adjustable platform accessory for mounting SMART™ complete i2, i3, i4, i5, i6 ix  & ix2 solutions using UF45, UF55, UF65, UF75, UF70, UX60, & UX80 projectors.

See WBAE extender kit for mounting interactive boards that need to be lower to the floor for younger classrooms.

See WBAU universal adapter kit for mounting interactive boards other than SMART™

Discontinued. See WBM3E for replacement.

• Install crossbar and wall bracket assembly to the wall
• Attach uprights to inserts on back of interactive board
• Hang uprights/interactive board onto crossbar

• Mount shifts left/right at the wall installation.
• Additional adjustment can be achieved by sliding the uprights and interactive board left/right along the mount crossbar.
• Flexible for mounting near wall obstructions and precision board placement

• Macro height adjust at uprights in 1" increments
• Micro height and leveling adjust at wall assemblies up to 1.5"

• Adjustable feet hold the installation in place, ensuring a stable writing surface

• Aesthetic "snap-on" covers and caps
• Compatible with 800, 600, & M600 Series boards

Use this extender accessory in addiition to the WBM2 whiteboard mount  for interactive boards that need to be lower to the floor for younger audiences.

Discontinued. See WBM3E for replacement.

• Attaches to WBM2 uprights
  
• Adds 13" of downward shift to WBM2
  
• Allows board to get within 20" of floor for average height dry erase/chalk boards
  
• Allows for anchoring to wall below existing dry erase/chalk boards
  
• Weight capacity 125 lbs

Use this universal adapter kit along with the WBM2 for SMART ™ 685 and 690 boards and interactive boards other than SMART ™.

• Attaches to WBM2 uprights and captures around bezel of interactive boards

• Compatible with Promethean 100, 300, 500 Activboards, Polyvision Eno Classic, TS series and much more!

• Compatible with boards 39" -58" tall and 1.1" to 2.7" deep

• Wt Capacity 125 lbs

The WBM2E is an extended length version of the WBM2 whiteboard mount. Allowing lower board placement and anchoring at the wall below the chalkboard/dry erase board.  A great solution for when the interactive boards need to be lower to the floor for younger audiences.

Discontinued. See WBM3E for replacement.

Easy 3 step install

• Install crossbar and wall bracket assembly to the wall
• Attach uprights to inserts on back of interactive board
• Hang uprights/interactive board onto crossbar

Dual Lateral Shift options

• Mount shifts left/right at the wall installation.
• Additional adjustment can be achieved by sliding the uprights and interactive board left/right along the mount crossbar.
• Flexible for mounting near wall obstructions and precision board placement

Macro & Micro Height Adjustments

• Macro height adjust at uprights in 1" increments
• Micro height and leveling adjust at wall assemblies up to 1.5"

Stable installation

• Extender legs attach to WBM2 uprights and allows for anchoring to wall below existing dry erase/chalk boards
• Allows board to get within 20" of floor for average height dry erase/chalk boards
• Aesthetic "snap-on" covers and caps
• Compatible with 800, 600, & M600 Series boards

• Compatible with 800, 600, & M600 Series boards 
• Dual Lateral Shift options
  • Mount shifts left/right at the wall installation
  • Additional adjustment can be achieved by sliding the uprights and interactive board left/right along the mount crossbar
• Macro & Micro Height Adjustments
  • Macro height adjust at uprights in 1" increments
  • Micro height and leveling adjust at wall assemblies up to 1.5"
  • Telescoping legs can be locked down infinitely using knobs on the fly
• Flexible and Stable installation
  • Legs telescope 5 - 7ft between top and bottom anchor points
  • Anchor at 4 pts around obstructions above and below dry erase/chalk board
  • Ideal for all audiences including younger children
• Weight Capacity 125 lbs

The WBAUF1 is a great solution for replacing or upgrading a SMART™ i2, i3, i4, or UF65W projector on an existing SMART™ i3 or i4 series wall arm.

• A cost effective solution for extending the life of a previous interactive investment
• All-Points™ Security System
• Fast Installation
• TAA compliant
• Compatible with the following projectors:
  • Epson PowerLite420/425W
  • Epson PowerLite 430/435W
  • Epson PowerLite 520/525W
  • Epson PowerLite 530/535W
  • HitachiCP-D31N
  • Hitachi CP-D32WN
  • NEC NP-M332XS
  • NEC NP-M333XS
  • NEC NP-M352WS