Back To Top Arrow
NewFusion_Hero_600x400 NewFusion_Hero_1400x550

Fusion Fixed & Tilt Mounts


360 Overview

The Original Fusion Just Got Better

Chief's upgrade of the Fusion fixed and tilt mounts was driven by installer feedback and direct observations of installations in the field. We knew installers loved the mount already, but we also know there's always room for improvement. We did so without losing the key features of Fusion.

What We Kept

Everything, including the 4 Cs:

ControlZone Leveling

Allows post-installation fine-tuning of height and leveling.

Centerless Shift

Provided generous post-installation lateral shift for perfect positioning.

Centris Tilt

Uses the center of gravity to balance the screen while maintaining a low profile (tilt mounts only).

ClickConnect

Makes an audible click when the mount is safely engaged with the display.

 

Fusion_Video_Thumb01

The 4 Cs of Fusion

Watch the development team demonstrate the 4 Cs of Fusion in the original design – all of which are still included in the new mounts

What We Added

Super Stability

Set screws keep the mount rigid and stable throughout the life of the installation. Engaging the set screws also ensures secure, precise positioning throughout the life of the installation.

Nesting Spacers

Exclusive nesting spacers can be stacked to achieve any depth, providing a simple, universal hardware solution for mounting displays.

Easier Access

Get easier access to equipment and cabling with the new Fusion Pull-Out Accessory, FCAV1U – ideal for recessed installations. The new accessory can be combined with any Fusion fixed or tilt mount, including portrait, and will be available in June, 2016. With this addition, the previous generation pull-out mounts (LSMVU, MSMVU, LSMVPU, MSMVPU) will be phased out in August, 2016.

Faster Installation

Integrated teardrop design speeds up wall plate installation by allowing pre-installation of the bolts to the wall. The mount can then be hung and the bolts tightened down to secure the install.

Quick Store Cords

New, magnetized ClickConnect makes it easy to store and access pull cords. Once the display is clicked into place simply snap the magnet anywhere onto the interface to hide the cords from view.

Improved Cable Management

Cables can be routed behind the poles without removing end caps.

Enhanced Security

What used to be a separate piece is now integrated into the design to make safeguarding displays easier.

Improved Packaging

We didn't stop with the mount either. Chief's engineers improved the overall experience, including the packaging. We made the box easier to open with less waste to throw away. We also included an interface hardware box that can be hung from the mount rails so you don't lose any pieces if there is a time gap between hanging the mount and hanging the display.

 

NewFusion_Video_Thumb02

New Fusion vs. Old Fusion

Watch the side-by-side comparison video to see how the new Fusion upgrades make installation even easier.

Mount Cross Reference

Fixed Mounts Old New Tilt Mounts Old New Pull-Out Mounts Old New
Msau Msa1u* Mtau Mta1u* Msmvu Msam1u + Fcav1u
Msmu Msm1u* Mtmu Mtm1u* Lsmvu Lsm1u + Fcav1u
Lsau Lsa1u Mtmpu Mtmp1u Msmvpu Mtmp1u + Fcav1u
Lsmu Lsm1u Ltmu Ltm1u Lsmvpu Mtmp1u** + Fcav1u
XSMU XSM1U LTMU LTM1U
Ltmpu Mtmp1u*
Xtmu Xtm1u

*Compatible with dual stud mounting only. Order the FCA1S to accommodate single stud mounting.
**FHB5038 VESA® adapter required for compatibility with 800 — 1000 mm vertical patterns.


Old New Compatibility
Lower Shelves FCA500 FCA800 Above/Below Component Shelf Fusion Fixed & Tilt Wall, Freestanding & Ceiling Mounts
FCS100 FCA802 Lower Component Shelf 18" (457 mm)
— FCA812 Lower Component Shelf for XL Displays
FVS100 FCA800 Above/Below Shelf 8" (203 mm)
FVS150 FCA801 Above/Below Shelf 14" (356 mm)
Upper Shelves FCA501 FCA801 Above/Below Shelf 14" (356 mm) Fusion Fixed & Tilt Wall, Freestanding & Ceiling Mounts
FCA502 FCA800 Above/Below Shelf 8" (203 mm)
FCA503 FCA801 Above/Below Component Shelf
FVS200 FCA800 Above/Below Shelf 8" (203 mm)
FVS250 FCA801 Above/Below Shelf 14" (356 mm)
FVS251 FCA801 Above/Below Shelf 14" (356 mm)
— FCA810 Above/Below Shelf for XL Displays, 8" (203 mm)
— FCA811 Lower Shelf for XL Displays, 14" (356 mm)
Center Shelves FVS300 FCA820 Center Camera Shelf, 8" (203 mm) All Fusion Series Mounts Mounts
FVS350 FCA821 Center Camera Shelf, 14" (356 mm)
Speaker Adapters FCA350 FCA830 Center Channel Speaker Adapter Fusion Fixed & Tilt Wall, Freestanding & Ceiling Mounts
FCA535 FCA831 Side Speaker Adapter
FCC100 FCA830 Center Channel Speaker Adapter
FLR100 FCA831 Side Speaker Adapter
— FCA840 Center Channel Speaker Adapter for XL Displays
— FCA841 Side Speaker Adapter for XL Displays
Side Covers — FCA106 Decorative Side Cover Accessory* Fusion Fixed & Tilt Mounts
Single Stud Adapter — FCA1S Single Stud Adapter Medium Fusion Fixed & Tilt
VESA® — FHB5038 VESA® Adapter for 800–1000 mm vertical patterns Medium Fusion Fixed & Tilt
CPU Adapters FCA100 FCA110 Cat5/Surge/CPU Adapter Fusion Fixed & Tilt Mounts
FCA102 FCA112 Surge CPU/Media Player Adapter All Fusion Wall Mounts
FCA103 FCA113 CPU Extender Adapter Fusion Fixed & Tilt Mounts

*Compatible with displays over 24" tall.


Drivers & Downloads

Mount Technical Drawings
Fusion Wall Mount Brochure
Fusion Cross Reference Brochure
FCAV1U Technical Drawing

  • Related Products
  • Features
  • Videos

Related Products

Connected Products

Features

Key Features

  • Centerless Shift provides post-installation lateral shift for limitless centering
  • Centris low-profile tilt uses the center of gravity to balance the screen while maintaining a low profile
  • ControlZone micro height and leveling adjustment provides post-installation fine tuning for perfect placement
  • ClickConnect offers an audible click when the screen safely engages with the mount
  • Quick-Store Cords use magnets to easily store and access pull cords
  • Integrated teardrop design speeds up wall plate installation by allowing pre-installation of the bolts to the wall
  • Set screws keep the mount rigid, stable and secure throughout the life of the installation
  • Exclusive nesting spacers can be stacked to achieve any depth
  • Improved cable management with new end caps
  • Integrated security flag
  • Ships with a custom hardware kit that can be hung from mount rails if installing in stages
  • Easy Open box with less waste to throw away

Videos

Fusion Installation

New Fusion vs Old Fusion